Figure 39. Acl Interface Configuration Window (1) - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
Parameter
DIRECTION
ACL_NAME
An example of entering a command that configures 'acl1' to the 'ge2' interface is
shown below.
APC# configure terminal
APC/configure# interface ge2
APC/configure/interface ge2#ip access-group fqm in acl1
3) To check the configuration information, use the 'show running-config network'
command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security>  <Access Control Lists>  <Access Group (Interface)> menu in the sub-
menus.
The initial window of WLAN ACL configuration is shown below. When you click the
<Add> or <Delete> button, you can add or delete ACL rule.
To perform detail configuration, select an interface in the list.
The types of interfaces you can configure are retrieved. In the INTERFACE, select an
interface. For DIRECTION, select Ingress or Egress. For ACL NAME, select an item
(name) that is configured in the ACL List configuration.
To apply the changed configuration, click the <Apply> button.
Samsung Electronics America
Application direction configuration (in/out)
ACL name to configure

Figure 39. ACL Interface Configuration Window (1)

Figure 40. ACL Interface Configuration Window (2)
Description
page 111 of 533
Version 5.2