WEC8500/8050 Operation Manual
Configuration using CLI
To manage an AP group, execute the command as follows.
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Create or delete an AP group. Use 'no' parameter in front of the command to delete an
AP group.
ap-group [AP_GROUP_NAME]
no ap-group [AP_GROUP_NAME]
3) Add or delete an AP to or from the AP group. Use 'no' parameter in front of the
command to delete an AP from the AP group. But, for a default AP group, you cannot
delete an AP from the group. If you delete an AP from other AP groups other than the
default group, the deleted AP is included into the default AP group.
add-ap [AP_NAME]
no add-ap [AP_NAME]
4) Use the 'show ap-group summary' command to check the AP group information.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<AP Groups> menu in the sub-menus. It provides the group configuration of the AP.
Click the <Add> or <Delete> button to add or delete a group.
Samsung Electronics America
Figure 61. AP groups configuration Window
Figure 62. AP Group Addition Window
Version 5.2
page 141 of 533