Multicast To Unicast - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual

3.6 Multicast to Unicast

Execute the 'show multi2uni-list' command to check the list of wireless terminals that use
the multicast to unicast function.
3.7 IP Multicast Configuration
3.7.1 IP Multicast Routing Configuration
Configuration using CLI
1) Go to configure mode of CLI.
WEC8500# configure terminal
2) Enable or disable the routing function for IP multicast.

ip multicast-routing: Enable

no ip multicast-routing: Disable
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Multicast>  <IP Multicast> menu in the sub-menus.
After selecting Enable/Disable in the IP Multicast window, click the <Apply> button to
apply the configuration.
Samsung Electronics America
Figure 45. IP Multicast Configuration Window
Version 5.2
page 122 of 533