WEC8500/8050 Operation Manual
4.2.1.3
802.11a/n Configuration
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, select <AP Groups>
in the submenu, and then select an AP group to configure. Settings can be configured under
the '802.11a/n' tab of the AP group.
The configuration items are as follows:
[Service Configuration of AP Group]
SERVICE: Enable or disable the radio service.
[Channel Configuration]
CURRENT CHANNEL: Channel configuration (range: 36-165)
CHANNEL FIX: The configured channel is configured as fixed and it is not affected
by automatic adjustment functions such as RRM. When the <Monitor> <Access
Points> <Radio> <802.11a/n/ac> menu is selected, the channel value is shown
as * (optional).
[TX Power Setting]
TX CURRENT POWER: TX power (range: 3-23)
TX POWER FIX: The configured TX power is configured as fixed and it is not
affected by automatic adjustment functions such as RRM. When the <Monitor>
<Access Points> <Radio> <802.11a/n/ac> menu is selected, the TxPower value
is shown as * (optional).
Samsung Electronics America
Figure 66. 802.11a/n Window for AP Group
To check the configured channel and TX power information, go to <Monitor>
<Access Points> <Radio> <802.11a/n/ac>.
Version 5.2
page 148 of 533