Alcatel-Lucent 5620 Troubleshooting Manual page 92

3 — Troubleshooting using network alarms
Alarm
Name: apsNoRspRaiseAlarm
Type: configurationAlarm (11)
Probable cause:
incompleteProtectionSwitching (549)
Name: apsPrvsnRaiseAlarm
Type: configurationAlarm (11)
Probable cause: provisioningMismatch (470)
Name: EthernetTunnelDown
Type: configurationAlarm (11)
Probable cause: ethernetTunnelDown (547)
(2 of 2)
Alarm
Name: LogLocFailure
Type: storageAlarm (25)
Probable causes:
•
AdminLocFailure (244)
•
BackupLocFailure (245)
Alarm
Name: DeploymentFailure
Type: deploymentFailure (5)
Probable cause:
failedToModifyNetworkResource (11)
Name: ThresholdCrossingAlarm
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
(1 of 2)
3-50
Attributes
Severity: Major
Object Type (class):
EthernetTunnelEndpoint
Domain: ethernettunnel
Implicitly cleared (self-clearing): Yes
Severity: Major
Object Type (class):
EthernetTunnelEndpoint
Domain: ethernettunnel
Implicitly cleared (self-clearing): Yes
Severity: Major
Object Type (class): EthernetTunnel
Domain: ethernettunnel
Implicitly cleared (self-clearing): Yes
Table 3-18 Domain: file
Attributes
Severity: Variable or indeterminate
Object Type (class): Policy
Domain: file
Implicitly cleared (self-clearing): No
Table 3-19 Domain: generic
Attributes
Severity: Minor
Object Type (class): GenericObject
Domain: generic
Implicitly cleared (self-clearing): Yes
Severity: Warning
Object Type (class): GenericObject
Domain: generic
Implicitly cleared (self-clearing): Yes
Alcatel-Lucent 5620 Service Aware Manager, Release
Aug 2010
Troubleshooting Guide
Additional information
The alarm is raised when an Ethernet
tunnel group protection switch is
incomplete, as indicated by a
comparison of the transmitted
'Requested Signal' values and the
received 'Bridged Signal' in the APS
protocol.
The alarm is raised when an Ethernet
tunnel group provisioning mismatch
is detected at the ETH layer. The
mismatch is detected through a
comparison of the transmitted and
received APS protocol A, B and D
bits.
The alarm is raised when the
aggregated Ethernet tunnel
Operational State is Down.
Additional information
The alarm is raised when an attempt
to create a log or billing file fails.
The probable cause is
AdminLocFailure when using the
admin location fails, in which case
the backup location, if specified, is
used. The probable cause is
BackupLocFailure when using the
backup location fails.
Additional information
The alarm is raised when the
5620 SAM is unable to create,
modify, or delete a network object
because of NE unreachability or a
failed SNMP set operation. The alarm
information includes the deployment
ID, the requesting user ID, and the
deployment type.
The alarm is raised when a
monitored object statistics-counter
value exceeds a threshold value in
the associated statistics policy.
3HE 05723 AAAD TQZZA Edition 01
8.0 R4