Alcatel-Lucent 5620 Troubleshooting Manual page 69

Alarm
Name: BatmPWVcNearEndFC
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Name: BatmPWVcPktsOoseq
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
(2 of 2)
Alarm
Name: AllArchiveLogsDeleted
Type: databaseAlarm (29)
Probable cause: archivedLogsIssue (154)
Name: ArchiveLogDiskSpaceBelowThreshold
Type: databaseAlarm (29)
Probable cause: diskSpaceIssue (153)
Name: BackupDiskSpaceBelowThreshold
Type: databaseAlarm (29)
Probable cause: diskSpaceIssue (153)
Name: DatabaseArchivedLogNotApplied
Type: configurationAlarm (11)
Probable cause:
databaseArchivedLogNotApplied (159)
(1 of 5)
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723 AAAD TQZZA Edition 01
Attributes
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
Table 3-11 Domain: db
Attributes
Severity: Warning
Object Type (class):
DatabaseManager
Domain: db
Implicitly cleared (self-clearing): No
Severity: Critical
Object Type (class):
DatabaseManager
Domain: db
Implicitly cleared (self-clearing): No
Severity: Critical
Object Type (class):
DatabaseManager
Domain: db
Implicitly cleared (self-clearing): No
Severity: Warning
Object Type (class):
DatabaseManager
Domain: db
Implicitly cleared (self-clearing): Yes
8.0 R4 Aug 2010
Troubleshooting Guide
3 — Troubleshooting using network alarms
Additional information
The alarm is raised when the total
number of local packet failures
crosses the threshold.
The alarm is raised when the total
number of successfully re-ordered
out-of-sequence packets crosses the
threshold.The packet sequence is
indicated by the TDM header
sequence numbers.
Additional information
The alarm is raised when the
5620 SAM deletes all database
archive logs because it requires more
disk space.When database disk space
is low, the 5620 SAM first deletes the
archive logs that have been applied
to the standby database and raises
the OldArchiveLogsDeleted alarm. If
deleting the applied archive logs
does not free up sufficient disk
space, the 5620 SAM deletes the
remaining archive logs, which
creates an archive log gap that
requires a standby database
reinstantiation to correct.The alarm
is raised only in a redundant
5620 SAM system.
The alarm is raised when the primary
or standalone database archive log
disk space threshold specified in the
nms-server.xml file is reached.
The alarm is raised when the primary
or standalone database backup disk
space threshold specified in the
nms-server.xml file is reached.
The alarm is raised when, during a
database backup, the 5620 SAM
determines that the archive logs are
not being applied to the standby
database, as indicated by the archive
log gap. The archive log gap
threshold is defined in the
nms-server.xml file.The alarm is
raised only in a redundant 5620 SAM
system.
3-27