Alcatel-Lucent 5620 Troubleshooting Manual page 214

6 — 5620 SAM LogViewer
2
3
6-6
Perform one of the following.
a If the 5620 SAM server is installed on Solaris, run the following script:
path/nms/bin/logviewerui.bash
where path is the 5620 SAM server installation location, typically /opt/5620sam/server
b If the 5620 SAM server is installed on Windows, run the following script:
path\nms\bin\logviewerui.bat
where path is the 5620 SAM server installation location, typically C:\5620sam\server
The LogViewer GUI opens with the Quick Links panel or the log tabs in the saved
workspace displayed.
To open a log file, perform one of the following:
a If the Quick Links panel is displayed, click on a link to view the associated log
file.
b Choose Quick Links→log_name from the LogViewer main menu.
c To open a recently viewed log, choose File→Recent Logs→log_file_name
from the LogViewer main menu.
d To browse for a log file, perform the following steps:
i Choose File→Local Log File from the LogViewer main menu or click on
the Open log button in the main tool bar. The Local Log File form opens.
ii Use the form to navigate to the log-file location.
iii Select a log file and click on the Add button between the form panels.
The log is listed in the panel on the right.
Note — The log file can be in compressed or uncompressed format.
iv If LogViewer cannot determine the type of log that the file contains, for
example, if a log file is renamed, it sets the Type to Other. Use the Type
drop-down menu to specify the log type, if required.
v Configure the Max. Messages parameter to specify the maximum
number of entries that are listed on the log tab. LogViewer removes the
oldest entries as required to keep the number of entries at or below this
value.
vi Configure the Auto-Tail parameter to specify whether the log tab
dynamically displays the log updates.
vii Click on the OK button. The Local Log File form closes.
Aug 2010
Troubleshooting Guide
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723 AAAD TQZZA Edition 01
8.0 R4