Alcatel-Lucent 5620 Troubleshooting Manual page 227

9
10
11
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723 AAAD TQZZA Edition 01
At each prompt, enter a regular expression to use as a match criterion, if
required, and press ↵.
vii The following prompt is displayed:
Display Filter? (Y/N):
Enter y ↵ to apply the filter to the current log display. LogViewer applies the
filter.
viii Enter the following to return to display mode:
return ↵
LogViewer enters display mode. The log updates are filtered before they are
displayed.
To list the available log files, perform the following steps.
Press ↵ to enter command mode.
i
ii Enter the following at the prompt:
list ↵
LogViewer lists the available log files.
iii Enter the following at the prompt to return to display mode:
return ↵
To display statistics about the current LogViewer session, perform the following
steps.
Press ↵ to enter command mode.
i
ii Enter the following at the prompt:
stats ↵
LogViewer displays statistics about the current session.
iii Enter the following at the prompt to return to display mode:
return ↵
To reset the statistics counters for the current LogViewer session, perform the
following steps.
Press ↵ to enter command mode.
i
ii Enter the following at the prompt:
reset ↵
Troubleshooting Guide
8.0 R4 Aug 2010
6 — 5620 SAM LogViewer
6-19