Alcatel-Lucent 5620 Troubleshooting Manual page 53

Service aware manager release 8.0
Hide thumbs Also See for 5620:
Table of Contents

Advertisement

2
Alcatel-Lucent 5620 Service Aware Manager, Release
3HE 05723
AAAD
TQZZA Edition 01
The alarm cause indicates the probable cause, which can result from a problem
on a related object lower in the hierarchy, even though no alarms are reported
against it. However, the problem may be caused by the state conditions of the
affected object itself.
To view the affected object states, click on the Affected Objects tab button,
select an object and click on the View Object button.
a
If the Administrative State is Up and the Operational State is Down, there are
two possibilities:
The affected object is the root cause of the problem. The alarm probable
cause is the root cause. See section
the alarm, which may help to correct the problem. When the problem is
fixed, all correlated alarms are cleared. See section
equipment problem.
The affected object is not the root cause of the problem. The alarm
probable cause does not provide the root cause of the problem. The root
cause is with a related, supporting object that is lower in the managed
object hierarchy. Perform Procedure
information.
b
If the Administrative State is Up and the Operational State is not Up or Down
but states a specific problem such as Not Ready or MTU Mismatch, this is the
root cause of the alarm. Correct the specified problem and all correlated
alarms should clear. See section
alarms still exist, perform Procedure 3-6.
c
If the object Administrative State is Down, it is not the root cause of the
alarm on the object; however, it may cause alarms higher in the network
object hierarchy. Change the Administrative State to Up. See section
a sample underlying port state problem. This does not clear the alarm on the
affected object that you are investigating. Perform Procedure
related object information.
Troubleshooting Guide
3 — Troubleshooting using network alarms
3.5
for additional information about
3-6
to review related object
3.4
for a sample configuration problem. If
8.0 R4
Aug 2010
3.4
for a sample
3.4
for
3-6
to review
3-11

Advertisement

Table of Contents
loading

Table of Contents