Accounting-Merge Enable - HP FlexNetwork MSR Series Command Reference Manual

undo accounting-level [ level ]
Default
No traffic levels are specified for ITA accounting.
Views
ITA policy view
Predefined user roles
network-admin
Parameters
level: Specifies a traffic level in the range of 1 to 8.
ipv4: Counts the traffic as IPv4 traffic.
ipv6: Counts the traffic as IPv6 traffic.
Usage guidelines
Execute this command multiple times to specify multiple traffic levels for ITA accounting.
By defining different traffic levels based on the destination addresses of users' traffic, you can use
ITA to separate the traffic accounting statistics of different levels for each user.
If you do not specify a level for the undo accounting-level command, this command removes the
ITA accounting configuration for all traffic levels in the ITA policy.
Examples
# In ITA policy ita1, specify traffic levels 2 and 5, and count the level-2 traffic as IPv4 traffic and the
level-5 traffic as IPv6 traffic.
<Sysname> system-view
[Sysname] ita policy ita1
[Sysname-ita-policy-ita1] accounting-level 2 ipv4
[Sysname-ita-policy-ita1] accounting-level 5 ipv6
Related commands
ita policy

accounting-merge enable

Use accounting-merge enable to enable the accounting merge feature.
Use undo accounting-merge enable to disable the accounting merge feature.
Syntax
accounting-merge enable
undo accounting-merge enable
Default
The accounting merge feature is disabled.
Views
ITA policy view
Predefined user roles
network-admin
149