Authentication-Algorithm - HP FlexNetwork MSR Series Command Reference Manual

Examples
# Create the IKE profile profile1.
<Sysname> system-view
[Sysname] ike profile profile1
# Enable AAA authorization. Specify the ISP domain abc and the username test.
[Sysname-ike-profile-profile1] aaa authorization domain abc username test

authentication-algorithm

Use authentication-algorithm to specify an authentication algorithm for an IKE proposal.
Use undo authentication-algorithm to restore the default.
Syntax
In non-FIPS mode:
authentication-algorithm { md5 | sha | sha256 | sha384 | sha512 }
undo authentication-algorithm
In FIPS mode:
authentication-algorithm { sha| sha256 | sha384 | sha512 }
undo authentication-algorithm
Default
In non-FIPS mode, the IKE proposal uses the HMAC-SHA1 authentication algorithm.
In FIPS mode, the IKE proposal uses the HMAC-SHA256 authentication algorithm.
Views
IKE proposal view
Predefined user roles
network-admin
Parameters
md5: Specifies HMAC-MD5 as the authentication algorithm.
sha: Specifies HMAC-SHA1 as the authentication algorithm.
sha256: Specifies HMAC-SHA256 as the authentication algorithm.
sha384: Specifies HMAC-SHA384 as the authentication algorithm.
sha512: Specifies HMAC-SHA512 as the authentication algorithm.
Examples
# Specify HMAC-SHA1 as the authentication algorithm for IKE proposal 1.
<Sysname> system-view
[Sysname] ike proposal 1
[Sysname-ike-proposal-1] authentication-algorithm sha
Related commands
display ike proposal

518