HP FlexNetwork MSR Series Command Reference Manual page 74

network: Network access user.
guest: Guest user account.
idle-cut { disable | enable }: Specifies local users with the idle cut feature disabled or enabled.
service-type: Specifies the local users who use a specific type of service.
•
advpn: ADVPN tunnel users.
•
ftp: FTP users.
•
http: HTTP users.
•
https: HTTPS users.
•
ike: IKE users who access the network through IKE extended authentication.
•
ipoe: IPoE users who access the network through Layer 2 or Layer 3 leased lines or STBs.
•
lan-access: LAN users who typically access the network through an Ethernet, such as 802.1X
users.
•
pad: X.25 PAD users.
•
portal: Portal users.
•
ppp: PPP users.
•
ssh: SSH users.
•
telnet: Telnet users.
•
terminal: Terminal users who log in through console ports, AUX ports, or async ports.
state { active | block }: Specifies local users in active or blocked state. A local user in active state
can access network services, but a local user in blocked state cannot.
user-name user-name: Specifies all local users using the specified username. The username must
be a case-sensitive string of 1 to 55 characters that does not contain the domain name.
vlan vlan-id: Specifies all local users in a VLAN. The vlan-id argument is in the range of 1 to 4094.
Usage guidelines
If you do not specify any parameters, this command displays information about all local users.
Examples
# Display information about all local users.
<Sysname> display local-user
Device management user root:
State:
Service type:
Access limit:
Current access number:
User group:
Bind attributes:
Authorization attributes:
Work directory:
User role list:
Password control configurations:
Password aging:
Network access user jj:
State:
Service type:
User group:
Active
SSH/Telnet/Terminal
Enabled Max access number: 3
1
system
flash:
network-admin
Enabled (3 days)
Active
Lan-access
system
56