Keychain - HP FlexNetwork MSR Series Command Reference Manual

undo inside-vpn
Default
No inside VPN instance is specified for an IKE profile. The device forwards protected data to the
VPN instance where the interface that receives the data resides.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the device
forwards protected data. The vpn-instance-name argument represents the VPN instance name, a
case-sensitive string of 1 to 31 characters.
Usage guidelines
This command determines where the device should forward received IPsec protected data. If you
configure this command, the device looks for a route in the specified VPN to forward the data. If you
do not configure this command, the device looks for a route in the VPN instance where the receiving
interface resides to forward the data.
Examples
# Specify the inside VPN instance vpn1 for IKE profile prof1.
<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] inside-vpn vpn-instance vpn1

keychain

Use keychain to specify an IKE keychain for pre-shared key authentication.
Use undo keychain to remove an IKE keychain.
Syntax
keychain keychain-name
undo keychain keychain-name
Default
No IKE keychain is specified for pre-shared key authentication.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
keychain-name: Specifies an IKE keychain name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
You can specify a maximum of six IKE keychains for an IKE profile. An IKE keychain specified earlier
has a higher priority.

541