Display Blacklist Ipv6 - HP FlexNetwork MSR Series Command Reference Manual

# (Distributed devices in IRF mode.) Display the number of IPv4 blacklist entries.
<Sysname> display blacklist ip count
Slot 1 in chassis 1:
Totally 3 blacklist entries.
Slot 2 in chassis 2:
Totally 3 blacklist entries.
Table 134 Command output
Field
IP address
VPN instance
DS-Lite tunnel peer
Type
TTL(sec)
Dropped
Totally 3 blacklist entries
Related commands
blacklist ip

display blacklist ipv6

Use display blacklist ipv6 to display IPv6 blacklist entries.
Syntax
Centralized devices in standalone mode:
display blacklist ipv6 [ source-ipv6-address [ vpn-instance vpn-instance-name ] ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display blacklist ipv6 [ source-ipv6-address [ vpn-instance vpn-instance-name ] ] [ slot
slot-number ] [ count ]
Distributed devices in IRF mode:
display blacklist ipv6 [ source-ipv6-address [ vpn-instance vpn-instance-name ] ] [ chassis
chassis-number slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
IPv4 address of the blacklist entry.
MPLS L3VPN instance to which the blacklisted IPv4 address belongs. If
the blacklisted IPv4 address is on the public network, this field displays
hyphens (--).
IPv6 address of the DS-Lite tunnel peer.
If the device is the AFTR of a DS-Lite tunnel, this field displays the IPv6
address of the B4 element from which the packet comes.
In other situations, this field displays hyphens (--).
Type of the IPv4 blacklist entry, Manual or Dynamic.
Remaining aging time of the IPv4 blacklist entry, in seconds. If no aging
time is set for the entry, this field displays Never.
Number of dropped packets sourced from the IPv4 address.
Total number of IPv4 blacklist entries.
862