Update Schedule - HP FlexNetwork MSR Series Command Reference Manual

The ipv6 ipv6-address option is not supported in the current software version. If you specify this
option, the command does not take effect.
Examples
# Configure user-defined NBAR rule abcd to match packets sourced from the IPv4 subnet
192.168.2.0/24.
<Sysname> system-view
[Sysname] nbar application abcd protocol http
[Sysname-nbar-application-abcd] source ip 192.168.2.0 24
Related commands
nbar application

update schedule

Use update schedule to set the update schedule for automatic update, including the update interval
and update time.
Use undo update schedule to restore the default.
Syntax
update schedule { daily | weekly { mon | tue | wed | thu | fri | sat | sun } } start-time time tingle
minutes
undo update schedule
Default
The device automatically updates the APR signature database between 01:01:00 to 05:01:00 every
day.
Views
Auto-update configuration view
Predefined user roles
network-admin
Parameters
daily: Specifies the daily update interval.
weekly: Specifies the weekly update interval. You can specify one day in a week for the update:
•
mon: Specifies Monday.
•
tue: Specifies Tuesday.
•
wed: Specifies Wednesday.
•
thu: Specifies Thursday.
•
fri: Specifies Friday.
•
sat: Specifies Saturday.
•
sun: Specifies Sunday.
start-time time: Specifies the start time for the update, in the format of hh:mm:ss. The value range
for the time argument is 00:00:00 to 23:59:59.
tingle minutes: Specifies the tolerance time in minutes. The value range for the minutes argument is
0 to 120 minutes. An automatic update will occur at a time point between the following time points:
•
Start time minus the tolerance time.
•
Start time plus the tolerance time.
706