Display Attack-Defense Flood Statistics Ipv6 - HP FlexNetwork MSR Series Command Reference Manual

display attack-defense flood statistics ipv6

Use display attack-defense flood statistics ipv6 to display IPv6 flood attack detection and
prevention statistics.
Syntax
Centralized devices in standalone mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ interface interface-type interface-number | local ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ [ interface interface-type interface-number | local ] [ slot slot-number ] ]
[ count ]
Distributed devices in IRF mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ [ interface interface-type interface-number | local ] [ chassis
chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ack-flood: Specifies ACK flood attack.
dns-flood: Specifies DNS flood attack.
fin-flood: Specifies FIN flood attack.
flood: Specifies all IPv6 flood attacks.
http-flood: Specifies HTTP flood attack.
icmpv6-flood: Specifies ICMPv6 flood attack.
rst-flood: Specifies RST flood attack.
syn-ack-flood: Specifies SYN-ACK flood attack.
syn-flood: Specifies SYN flood attack.
udp-flood: Specifies UDP flood attack.
ipv6-address: Specifies a protected IPv6 address. If you do not specify an IPv6 address, this
command displays flood attack detection and prevention statistics for all protected IPv6 addresses.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the protected IPv6
address belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
Do not specify this option if the protected IPv6 address is on the public network.
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
828