Display Object-Policy Zone-Pair Security - HP FlexNetwork MSR Series Command Reference Manual

Usage guidelines
If you specify neither the ip keyword nor the ipv6 keyword, the system displays statistics for all object
policies applied to the specified zone pair.
Examples
# Display statistics for all object policies applied to the zone pair with source security zone office and
destination security zone library.
<Sysname> display object-policy statistics zone-pair security source office destination
library
Object-policy apply ip OfficeToLibrary
rule 0 pass source-ip sourceip1 (5 packets,10 bytes)
Object-policy apply ipv6 OfficeToLibraryIPv6
rule 0 pass source-ip sourceip3 (6 packets,13 bytes)
Table 120 Command output
Field
Object-policy apply ip OfficeToLibrary
rule 0 pass source-ip sourceip1
Object-policy apply ipv6 OfficeToLibraryIPv6
rule 0 pass source-ip sourceip3
x packets,y bytes
Related commands
reset object-policy statistics

display object-policy zone-pair security

Use display object-policy zone-pair security to display information about the object policies
applied to zone pairs.
Syntax
display object-policy
destination-zone-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source source-zone-name: Specifies a source security zone name, a case-insensitive string of 1 to
31 characters.
Description
Name of the IPv4 object policy applied to the zone pair.
Statement of rule 0. The value of sourceip1 is the name of
the source IPv4 address object group.
Name of the IPv6 object policy applied to the zone pair.
Statement of rule 0. The value of sourceip3 is the name of
the source IPv6 address object group.
The rule has matched x packets, a total of y bytes. This field
is displayed only when the following conditions exist:
•
The counting or logging keyword is specified in the
rule command.
•
The rule has been matched.
zone-pair security
797
[ source source-zone-name destination