Free-Traffic Threshold - HP FlexNetwork MSR Series Command Reference Manual

Name
EAP-Message
User-Notify
BAS-IPv6
UserIPv6-List
Examples
# Exclude the UpLinkFlux attribute (number 6) from portal ACK_AUTH packets.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] exclude-attribute 6 ack-auth
Related commands
display portal server

free-traffic threshold

Use free-traffic threshold to specify the free-traffic threshold for portal users.
Use undo free-traffic threshold to restore the default.
Syntax
free-traffic threshold value
undo free-traffic threshold
Default
The free-traffic threshold is 0 bytes.
Views
MAC binding server view
Predefined user roles
network-admin
Parameters
value: Specifies the free-traffic threshold in the range of 0 to 10240000 bytes. If the free-traffic
threshold is set to 0, the device immediately triggers MAC-based quick portal authentication for a
user once the user's traffic is deleted.
Usage guidelines
After MAC-based quick portal authentication is configured, the device monitors a user's network
traffic (sent and received) in real time before the MAC-trigger entry for the user ages out. A user can
access the network without authentication if the user's network traffic is below the free-traffic
threshold. When the user's network traffic reaches the threshold, the device triggers MAC-based
quick portal authentication for the user.
If the user passes portal authentication, the device deletes the MAC-trigger entry and clears the user
traffic statistics. If the user fails authentication, the device does not trigger MAC-based quick
authentication for the user before the MAC-trigger entry ages out. When the MAC-trigger entry ages
out, the device clears the user traffic statistics.
Number Description
An EAP attribute that needs to be transported transparently. This
14 attribute
EAP-Message attributes can exist in a portal authentication packet.
Value of the hw_User_Notify attribute in a RADIUS accounting
15
response. This attribute needs to be transported transparently.
IPv6 address of the access device. All packets sent from the access
100
device carry this attribute.
101 List of IPv6 addresses of an IPv6 portal user.
254
is applicable to EAP TLS authentication. Multiple