Display Connection-Limit Ipv6-Stat-Nodes - HP FlexNetwork MSR Series Command Reference Manual

display connection-limit ipv6-stat-nodes

Use display connection-limit ipv6-stat-nodes to display statistics about IPv6 connections that
match connection limit rules globally or on an interface.
Syntax
Centralized devices in standalone mode:
display connection-limit ipv6-stat-nodes { global | interface interface-type interface-number }
[ destination destination-ip | service-port port-number | source source-ip ] * [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display connection-limit ipv6-stat-nodes { global | interface interface-type interface-number }
[ slot slot-number ] [ destination destination-ip | service-port port-number | source source-ip ] *
[ count ]
Distributed devices in IRF mode:
display connection-limit ipv6-stat-nodes { global | interface interface-type interface-number }
[ chassis chassis-number slot slot-number ] [ destination destination-ip | service-port port-number
| source source-ip ] * [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
global: Displays statistics about IPv6 connections that match connection limit rules globally.
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. This option is available only
when you specify the global keyword or specify a virtual interface, such as a VLAN-interface and
tunnel interface. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
global keyword or specify a virtual interface, such as a VLAN interface or tunnel interface.
(Distributed devices in IRF mode.)
destination destination-ip: Specifies a destination by its IP address.
service-port port-number: Specifies a service port by its port number.
source source-ip: Specifies a source by its IP address.
count: Displays only the number of limit rule-based statistics sets. Detailed information about the
specified IPv6 connections is not displayed. If you do not specify this keyword, the command
displays detailed information about the specified IPv6 connections that match connection limit rules.
Usage guidelines
The statistics for connections that match connection limit rules include the following information:
•
Connection information, including the source/destination IP address, service port, and transport
layer protocol of connections.
767