HP FlexNetwork MSR Series Command Reference Manual page 859

display attack-defense scan attacker ip [ interface interface-type interface-number | local ]
[ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense scan attacker ip [ [ interface interface-type interface-number | local ]
[ slot slot-number ] ] [ count ]
Distributed devices in IRF mode:
display attack-defense scan attacker ip [ [ interface interface-type interface-number | local ]
[ chassis chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the device or a global interface, such as a VLAN interface or tunnel interface. If you do not specify a
card, this command displays information about IPv4 scanning attackers for all cards. (Distributed
devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. This option is available only
when you specify the device or a global interface, such as a VLAN interface or tunnel interface. If you
do not specify a member device, this command displays information about IPv4 scanning attackers
for all member devices. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
device or a global interface, such as a VLAN interface or tunnel interface. If you do not specify a card,
this command displays information about IPv4 scanning attackers for all cards. (Distributed devices
in IRF mode.)
count: Displays the number of matching IPv4 scanning attackers.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPv4 scanning
attackers.
Examples
# (Centralized devices in standalone mode.) Display information about all IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip
IP addr(DslitePeer) VPN instance
192.168.31.2(--)
2.2.2.3(--)
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display information
about all IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip
Slot 1:
IP addr(DslitePeer) VPN instance
192.168.31.2(--)
Protocol
-- TCP
-- UDP
Protocol
-- TCP
841
Detected on Duration(min)
GE1/0/2 1284
GE1/0/2 23
Detected on Duration(min)
GE1/0/2 1284