Proposal - HP FlexNetwork MSR Series Command Reference Manual

<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] priority 10

proposal

Use proposal to specify IKE proposals for an IKE profile.
Use undo proposal to restore the default.
Syntax
proposal proposal-number&<1-6>
undo proposal
Default
No IKE proposals are specified for an IKE profile and the IKE proposals configured in system view
are used for IKE negotiation.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
proposal-number&<1-6>: Specifies a space-separated list of up to six IKE proposals by their
numbers in the range of 1 to 65535. An IKE proposal specified earlier has a higher priority.
Usage guidelines
When acting as the initiator, the device sends the specified IKE proposals to its peer for IKE
negotiation. When acting as the responder, the device uses the IKE proposals configured in system
view to match the IKE proposals received from the initiator.
Examples
# Specify IKE proposal 10 for the IKE profile prof1.
<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] proposal 10
Related commands
ike proposal
reset ike sa
Use reset ike sa to delete IKE SAs.
Syntax
reset ike sa [ connection-id connection-id ]
Views
User view
Predefined user roles
network-admin
549