Dot1X Ead-Assistant Enable - HP FlexNetwork MSR Series Command Reference Manual

Examples
# Specify the at sign (@) and forward slash (/) as domain name delimiters.
<Sysname> system-view
[Sysname] dot1x domain-delimiter @/
Related commands
display dot1x

dot1x ead-assistant enable

Use dot1x ead-assistant enable to enable the EAD assistant feature.
Use undo dot1x ead-assistant enable to disable the EAD assistant feature.
Syntax
dot1x ead-assistant enable
undo dot1x ead-assistant enable
Default
The EAD assistant feature is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
MSR1002-4/1003-8S
The EAD assistant feature enables the access device to redirect a user seeking to access the
network to download and install EAD client. This feature eliminates the tedious job of the
administrator to deploy EAD clients.
The feature is mutually exclusive with MAC authentication and port security. You must disable MAC
authentication and port security globally before you enable the EAD assistant feature.
To make the EAD assistant feature take effect on a port, you must enable 802.1X on the port and set
the port authorization mode to auto.
Examples
# Enable the EAD assistant feature.
<Sysname> system-view
167
Command compatibility
Yes
Yes
No
Yes
No
No
Yes