Reset Dot1X Guest-Vlan - HP FlexNetwork MSR Series Command Reference Manual

dot1x retry
dot1x timer

reset dot1x guest-vlan

Use reset dot1x guest-vlan to remove users from the 802.1X guest VLAN on a port.
Syntax
reset dot1x guest-vlan interface interface-type interface-number [ mac-address mac-address ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
mac-address mac-address: Specifies the MAC address of an 802.1X user in the guest VLAN. If you
do not specify this option, the command removes all 802.1X users from the 802.1X guest VLAN on
the port.
Examples
# Remove the 802.1X user with MAC address 1-1-1 from the 802.1X guest VLAN on port
GigabitEthernet 1/0/1.
<Sysname> reset dot1x guest-vlan interface gigabitethernet 1/0/1 mac-address 1-1-1
Related commands
dot1x guest-vlan
reset dot1x statistics
Use reset dot1x statistics to clear 802.1X statistics.
Syntax
Wireless devices:
reset dot1x statistics [ ap ap-name [ radio radio-id ] | interface interface-type interface-number
Wired devices:
reset dot1x statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. The string
can contain letters, digits, underscores (_), left brackets ([), right brackets (]), forward slashes (/), and
hyphens (-).If you do not specify an AP, this command clears statistics of 802.1X users for all APs.
radio radio-id: Specifies a radio by its ID. The value range for the radio-id argument varies by device
model. If you do not specify a radio, this command clears 802.1X statistics for all radios on the
specified AP.
186