Dot1X Ead-Assistant Free-Ip - HP FlexNetwork MSR Series Command Reference Manual

[Sysname] dot1x ead-assistant enable
Related commands
display dot1x

dot1x ead-assistant free-ip

dot1x ead-assistant url
dot1x ead-assistant free-ip
Use dot1x ead-assistant free-ip to configure a free IP.
Use undo dot1x ead-assistant free-ip to remove the specified or all free IP addresses.
Syntax
dot1x ead-assistant free-ip ip-address { mask-address | mask-length }
undo dot1x ead-assistant free-ip { ip-address { mask-address | mask-length } | all }
Default
No free IPs exist. Users cannot access any segments before they pass 802.1X authentication.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address: Specifies a freely accessible IP address segment, also called a free IP.
mask: Specifies an IP address mask.
mask-length: Specifies IP address mask length in the range of 1 to 32.
all: Removes all free IP addresses.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
MSR1002-4/1003-8S
Execute this command multiple times to configure multiple free IPs.
With EAD assistant enabled on the device, unauthenticated 802.1X users can access the network
resources in the free IP segments before they pass 802.1X authentication.
Examples
# Configure 192.168.1.1/16 as a free IP.
168
Command compatibility
Yes
Yes
No
Yes
No
No
Yes