HP FlexNetwork MSR Series Command Reference Manual page 233

Portal status: Disabled
Authentication type: Disabled
Portal Web server: Not configured
Authentication domain: Not configured
Secondary portal Web server: Not configured
Pre-auth domain: Not configured
User-dhcp-only: Disabled
Pre-auth IP pool: Not configured
Extend-auth domain: Not configured
Max portal users: Not configured
Bas-ipv6: Not configured
User detection: Not configured
Portal temp-pass: Disabled
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authentication subnet:
IP address
Table 17 Command output
Field
Portal information of interface
Radio ID
SSID
NAS-ID profile
VSRP instance
VSRP state
Authorization
Strict checking
IPv4
IPv6
Server name
--
Description
Portal configuration on the interface.
ID of the radio.
Service set identifier.
NAS-ID profile on the interface.
Name of the VSRP instance on the interface.
VSRP state of the interface:
•
Master—The device acts as the master in the VSRP instance.
•
Backup—The device acts as the backup in the VSRP instance.
•
Down—The device is not running in the VSRP instance. This state
occurs in either of the following conditions:
The associated VRRP group is in Initial state.

The VSRP instance does not exist or is not correctly configured

on the device.
•
N/A—The interface is not associated with any VSRP instance.
Authorization information type:
•
ACL
•
User profile
Whether strict checking is enabled on portal authorization information.
IPv4 portal configuration.
IPv6 portal configuration.
215
Action
--
Prefix length
Prefix length