Hwtacacs Nas-Ip - HP FlexNetwork MSR Series Command Reference Manual

Field
Response Timeout Interval(seconds)
Username Format
Data flow unit
Packet unit
Related commands
reset hwtacacs statistics

hwtacacs nas-ip

Use hwtacacs nas-ip to specify a source IP address for outgoing HWTACACS packets.
Use undo hwtacacs nas-ip to delete a source IP address for outgoing HWTACACS packets.
Syntax
hwtacacs nas-ip { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
undo hwtacacs nas-ip { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
Default
The source IP address of an HWTACACS packet sent to the server is the IP address of the outbound
interface.
Views
System view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies an IPv4 address, which must be an address of the device. The IP address
cannot be 0.0.0.0, 255.255.255.255, a class D address, a class E address, or a loopback address.
ipv6 ipv6-address: Specifies an IPv6 address, which must be a unicast address of the device and
cannot be a loopback address or a link-local address.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the source IP
address belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
To configure a public-network source IP address, do not specify this option.
Usage guidelines
The source IP address of HWTACACS packets that a NAS sends must match the IP address of the
NAS that is configured on the HWTACACS server. An HWTACACS server identifies a NAS by IP
address. Upon receiving an HWTACACS packet, an HWTACACS server checks whether the source
IP address of the packet is the IP address of a managed NAS.
•
If the source IP address of the packet is the IP address of a managed NAS, the server
processes the packet.
•
If the source IP address of the packet is not the IP address of a managed NAS, the server drops
the packet.
Description
HWTACACS server response timeout period, in seconds.
Format for the usernames sent to the HWTACACS server. Possible
values include:
•
with-domain—Includes the domain name.
•
without-domain—Excludes the domain name.
•
keep-original—Forwards the username as the username is
entered.
Measurement unit for data flows.
Measurement unit for packets.
118