Description - HP FlexNetwork MSR Series Command Reference Manual

Object group commands

description

Use description to configure a description for an object group.
Use undo description to restore the default.
Syntax
description text
undo description
Default
No description is configured for an object group.
Views
Object group view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 127 characters.
Examples
# Configure the description as This is an IPv4 object-group for an IPv4 address object group.
<Sysname> system-view
[Sysname] object-group ip address ipgroup
[Sysname-obj-grp-ip-ipgroup] description This is an IPv4 object-group
display object-group
Use display object-group to display information about object groups.
Syntax
display object-group [ { { ip | ipv6 } address | service | port } [ default ] [ name
object-group-name ] | name object-group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ip address: Specifies the IPv4 address object groups.
ipv6 address: Specifies the IPv6 address object groups.
port: Specifies the port object groups.
service: Specifies the service object groups.
default: Specifies the default object groups.

781