Authentication-Algorithm - HP FlexNetwork MSR Series Command Reference Manual

[Sysname] keychain abc mode absolute
[Sysname-keychain-abc] key 1
[Sysname-keychain-abc-key-1] accept-lifetime utc 12:30 2015/1/21 to 18:30 2015/1/21

authentication-algorithm

Use authentication-algorithm to specify an authentication algorithm for a key.
Use undo authentication-algorithm to restore the default.
Syntax
authentication-algorithm { hmac-md5 | md5 }
undo authentication-algorithm
Default
No authentication algorithm is specified for a key.
Views
Key view
Predefined user roles
network-admin
Parameters
hmac-md5: Specifies the HMAC-MD5 authentication algorithm.
md5: Specifies the MD5 authentication algorithm.
Usage guidelines
If an application does not support the authentication algorithm specified for a key, the application
cannot use the key for packet authentication.
Examples
# Specify the MD5 authentication algorithm for key 1 of the keychain abc in absolute time mode.
<Sysname> system-view
[Sysname] keychain abc mode absolute
[Sysname-keychain-abc] key 1
[Sysname-keychain-abc-key-1] authentication-algorithm md5
display keychain
Use display keychain to display keychain information.
Syntax
display keychain [ name keychain-name [ key key-id ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
374