Authorization Portal - HP FlexNetwork MSR Series Command Reference Manual

Examples
# In ISP domain test, perform local authorization for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login local
# In ISP domain test, perform RADIUS authorization for login users based on scheme rd and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login radius-scheme rd local
Related commands
authorization default
hwtacacs scheme
local-user
radius scheme

authorization portal

Use authorization portal to configure the authorization method for portal users.
Use undo authorization portal to restore the default.
Syntax
In non-FIPS mode:
authorization portal { local [ none ] | none | radius-scheme radius-scheme-name [ local ]
[ none ] }
undo authorization portal
In FIPS mode:
authorization portal { local | radius-scheme radius-scheme-name [ local ] }
undo authorization portal
Default
The default authorization method of the ISP domain is used for portal users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local authorization.
none: Does not perform authorization. An authenticated portal user directly accesses the network.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
33