Display Ikev2 Proposal - HP FlexNetwork MSR Series Command Reference Manual

Field
Match criteria
Local identity
Local authentication method
Remote authentication methods
Keychain
Sign certificate domain
Verify certificate domain
SA duration
DPD
Config exchange
NAT keepalive
Inside vrf
AAA authorization
Related commands
ikev2 profile

display ikev2 proposal

Use display ikev2 proposal to display the IKEv2 proposal configuration.
Syntax
display ikev2 proposal [ name | default ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name: Specifies an IKEv2 proposal by its name, a case-insensitive string of 1 to 63 characters.
Description
Criteria for looking up the IKEv2 profile.
ID of the local end.
Method that the local end uses for authentication.
Methods that the remote end uses for authentication.
IKEv2 keychain that the IKEv2 profile uses.
PKI domain used for signature generation.
PKI domain used for verifying the remote end's certificate.
Lifetime of the IKEv2 SA.
DPD settings:
•
Detection interval in seconds.
•
Retry interval in seconds.
•
Detection mode, on demand or periodically.
If DPD is disabled, this field displays Disabled.
Configuration exchange settings:
•
request—The local end sends request messages
carrying the configuration request payload during the
IKE_AUTH exchange.
•
set accept—The local end accepts the configuration set
payload carried in Info messages.
•
set send—The local end sends Info messages carrying
the configuration set payload.
NAT keepalive interval in seconds.
Inside VPN instance.
AAA authorization settings:
•
ISP domain name.
•
Username.
560