Display Attack-Defense Flood Statistics Ip - HP FlexNetwork MSR Series Command Reference Manual

display client-verify tcp protected ip

display attack-defense flood statistics ip

Use display attack-defense flood statistics ip to display IPv4 flood attack detection and
prevention statistics.
Syntax
Centralized devices in standalone mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmp-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ip [ ip-address [ vpn
vpn-instance-name ] ] [ interface interface-type interface-number | local ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmp-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ip [ ip-address [ vpn
vpn-instance-name ] ] [ [ interface interface-type interface-number | local ] [ slot slot-number ] ]
[ count ]
Distributed devices in IRF mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmp-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ip [ ip-address [ vpn
vpn-instance-name ] ] [ [ interface interface-type interface-number | local ] [ chassis
chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ack-flood: Specifies ACK flood attack.
dns-flood: Specifies DNS flood attack.
fin-flood: Specifies FIN flood attack.
flood: Specifies all IPv4 flood attacks.
http-flood: Specifies HTTP flood attack.
icmp-flood: Specifies ICMP flood attack.
rst-flood: Specifies RST flood attack.
syn-ack-flood: Specifies SYN-ACK flood attack.
syn-flood: Specifies SYN flood attack.
udp-flood: Specifies UDP flood attack.
ip-address: Specifies a protected IPv4 address. If you do not specify an IPv4 address, this command
displays flood attack detection and prevention statistics for all protected IPv4 addresses.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the protected IPv4
address belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
Do not specify this option if the protected IPv4 address is on the public network.
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
825