Radius Configuration Commands; Accounting-On Enable - HP HSR6600 Command Reference Manual

system time is between the validity time and the expiration time. If it is, the device permits the user to
access the network. Otherwise, the device denies the access request of the user.
Examples
# Set the validity time of user abc to 12:10:20 on April 30, 2008, and set the expiration time to 12:10:20
on May 31, 2008.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] validity-date 12:10:20-2008/04/30
[Sysname-luser-abc] expiration-date 12:10:20-2008/05/31
Related commands
expiration-date

RADIUS configuration commands

accounting-on enable

Use accounting-on enable to configure the accounting-on feature.
Use undo accounting-on enable to disable the accounting-on feature.
Syntax
accounting-on enable [ interval seconds | send send-times ] *
undo accounting-on enable
Default
The accounting-on feature is disabled.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
seconds: Time interval for retransmitting an accounting-on packet in seconds, ranging from 1 to 15. The
default is 3 seconds.
send-times: Maximum number of accounting-on packet transmission attempts, ranging from 1 to 255.
The default is 50.
Usage guidelines
The accounting-on feature enables the device, after rebooting, to automatically send an accounting-on
message to the RADIUS accounting server indicated by the RADIUS scheme to stop accounting for and
log out online users.
Parameters set with the accounting-on enable command take effect immediately.
After executing the accounting-on enable command, issue the save command to make sure that the
command takes effect after the device reboots.
57