Local-Guest Manager-Email - HP FlexNetwork MSR Series Command Reference Manual

Examples
# Create 20 local guests in batch with user names abc01 through abc20 for user group visit. The
user accounts are effective from 2014/10/01 00:00:00 to 2015/10/02 12:00:00.
<Sysname> system-view
[Sysname] local-guest generate username-prefix abc suffix 01 group visit count 20
validity-datetime 2014/10/01 00:00:00 to 2015/10/02 12:00:00
Related commands
local-user
display local-user

local-guest manager-email

Use local-guest manager-email to configure the email address of the guest manager.
Use undo local-guest manager-email to restore the default.
Syntax
local-guest manager-email email-address
undo local-guest manager-email
Default
No email address is configured for the guest manager.
Views
System view
Predefined user roles
network-admin
Parameters
email-address: Specifies the email address, a case-sensitive string of 1 to 255 characters. For
example, sec@abc.com. The address must comply with RFC 822.
Usage guidelines
Use this command to specify the email address to which the device sends the local guest registration
requests for approval.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Configure the email address of the guest manager as xyz@yyy.com.
<Sysname> system-view
[Sysname] local-guest manager-email xyz@yyy.com
Related commands
local-guest email format
local-guest email sender
local-guest email smtp-server
local-guest send-email
67