Portal Fail-Permit Server - HP FlexNetwork MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (392 pages) ,
- Configuration manuals (159 pages)
Advertisement
device interacts with the local portal Web server to complete the remaining process of portal
authentication.
Only direct portal authentication that uses a local portal Web portal server supports third-party
authentication.
Examples
# Create a QQ authentication server and enter its view.
<Sysname> system-view
[Sysname] portal extend-auth-server qq
[Sysname-portal-extend-auth-server-qq]
# Create an email authentication server and enter its view.
<Sysname> system-view
[Sysname] portal extend-auth-server mail
[Sysname-portal-extend-auth-server-mail]
Related commands
display portal extend-auth-server
portal fail-permit server
Use portal [ ipv6 ] fail-permit server to enable the portal fail-permit feature for a portal
authentication server.
Use undo portal [ ipv6 ] fail-permit server to disable the portal fail-permit feature for the portal
authentication server.
Syntax
portal [ ipv6 ] fail-permit server server-name
undo portal [ ipv6 ] fail-permit server
Default
Portal fail-permit is disabled for the portal authentication server.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6: Specifies an IPv6 portal authentication server. Do not specify this keyword for an IPv4 portal
authentication server.
server-name: Specifies a portal authentication server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
When portal fail-permit is enabled for a portal authentication server and portal Web servers on an
interface, the interface disables portal authentication in either of the following conditions:
•
Both the primary and backup portal Web servers are unreachable.
•
The specified portal authentication server is unreachable.
Portal authentication resumes on the interface when the specified portal authentication server and a
minimum of one portal Web server becomes reachable. After portal authentication resumes, users
who failed portal authentication and unauthenticated portal users need to pass authentication to
276
Advertisement
