HP FlexNetwork MSR Series Command Reference Manual page 413

1. Save the exported local host public key to a file by using one of the following methods:
Use the public-key local export rsa [ name key-name ] { openssh | ssh2 } command to

export the key, and then copy and paste it to a file.
Use the public-key local export rsa [ name key-name ] { openssh | ssh2 } filename

command to export key to a file. You cannot export the key to the folder pkey or its
subfolders.
2. Transfer a copy of the file to the peer device, for example, by using FTP in binary mode or TFTP.
For more information about FTP and TFTP, see Fundamentals Configuration Guide.
3. On the peer device, use the public-key peer import sshkey command to import the host
public key from the file.
SSH1.5, SSH2.0, and OpenSSH are different public key formats. Choose the correct public key
format that is supported on the device where you import the host public key. In FIPS mode, the
device only supports SSH2.0 and OpenSSH.
Examples
# Export the host public key of the local RSA key pair with the default name in OpenSSH format to a
file named key.pub.
<Sysname> system-view
[Sysname] public-key local export rsa openssh key.pub
# Display the host public key of the local RSA key pair with the default name in SSH2.0 format.
<Sysname> system-view
[Sysname] public-key local export rsa ssh2
---- BEGIN SSH2 PUBLIC KEY ----
Comment: "rsa-key-2011/05/12"
AAAAB3NzaC1yc2EAAAADAQABAAAAgQDapKr+/gTCyWZyabuCJuJjMeMPQaj/kixzOCCAl+hDMmEGMrSfddq/b
YcbgM7Buit1AgB3x0dFyTPi85DcCznTW4goPXAKFjuzCbGfj4chakSr+/aj1k3rM+XOvyvPJilneKJqhPT0xd
v4tlas+mLNloY0dImbwS2kwE71rgg1CQ==
---- END SSH2 PUBLIC KEY ----
# Display the host public key of the local RSA key pair with the default name in OpenSSH format.
<Sysname> system-view
[Sysname] public-key local export rsa openssh
ssh-rsa
AAAAB3NzaC1yc2EAAAADAQABAAAAgQDapKr+/gTCyWZyabuCJuJjMeMPQaj/kixzOCCAl+hDMmEGMrSfddq/b
YcbgM7Buit1AgB3x0dFyTPi85DcCznTW4goPXAKFjuzCbGfj4chakSr+/aj1k3rM+XOvyvPJilneKJqhPT0xd
v4tlas+mLNloY0dImbwS2kwE71rgg1CQ== rsa-key
# Export the host public key of local RSA key pair rsa1 in OpenSSH format to a file named rsa1.pub.
<Sysname> system-view
[Sysname] public-key local export rsa name rsa1 openssh rsa1.pub
# Display the host public key of local RSA key pair rsa1 in SSH2.0 format.
<Sysname> system-view
[Sysname] public-key local export rsa name rsa1 ssh2
---- BEGIN SSH2 PUBLIC KEY ----
Comment: "rsa-key-2011/05/12"
AAAAB3NzaC1yc2EAAAADAQABAAAAgQDevEbyF93xHUJucJWqRc1r8fhzQ9lSVprCI6ATZeDYyR1J00fBQ8XY+
q2olqoagn5YDyUC8ZJvUhlyMOHeORpkAVxD3XncTp4XG66h3rTHHa7Xmm7f1GDYlF0n05t8mCLVaupbfCzP8b
a8UkrUmMO4fUvW6zavA5LYxtlAiQv0KQ==
---- END SSH2 PUBLIC KEY ----
# Display the host public key of local RSA key pair rsa1 in OpenSSH format.
<Sysname> system-view
395