Ssh Ip Alias - HP FlexNetwork MSR Series Command Reference Manual

<Sysname> system-view
[Sysname] sftp server idle-timeout 500
Related commands
display ssh server

ssh ip alias

Use ssh ip alias to associate an SSH redirect listening port with an IP address.
Use undo ssh ip alias to delete the IP address associated with the SSH redirect listening port.
Syntax
ssh ip alias ip-address port-number
undo ssh ip alias ip-address
Default
An SSH redirect listening port is not associated with an IP address.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address to be associated with the SSH redirect listening port. The IP
address cannot be the address of an interface on the device, but it can be on the same subnet as an
interface IP address on the device.
port-number: Specifies an SSH redirect listening port number in the range of 4000 to 50000.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
The SSH redirect server can provide the SSH redirect service after SSH redirect is enabled and an
SSH redirect listening port is configured. The SSH client can use the ssh2 ip address port number
command to access the destination device. The ip address argument and the port number argument
specify the IP address of the SSH redirect server and the SSH redirect listening port, respectively.
After the ssh ip alias command is configured, the client can use the ssh2 ip address command to
access the destination device. The ip address argument specifies the IP address associated with the
SSH redirect listening port.
Command compatibility
No
No
Yes
Yes
Yes
No
No
600