Connection-Limit - HP FlexNetwork MSR Series Command Reference Manual

Connection limit commands
Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.

connection-limit

Use connection-limit to create a connection limit policy and enter its view, or enter the view of an
existing connection limit policy.
Use undo connection-limit to delete a connection limit policy.
Syntax
connection-limit { ipv6-policy | policy } policy-id
undo connection-limit { ipv6-policy | policy } policy-id
Default
No connection limit policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy: Specifies an IPv6 connection limit policy.
policy: Specifies an IPv4 connection limit policy.
policy-id: Specifies the ID of a connection limit policy. An IPv4 or IPv6 connection limit policy has its
own number. The value range for this argument is 1 to 32.
Examples
# Create IPv4 connection limit policy 1 and enter its view.
<Sysname> system-view
[Sysname] connection-limit policy 1
[Sysname-connlmt-policy-1]
# Create IPv6 connection limit policy 12 and enter its view.
<Sysname> system-view
[Sysname] connection-limit ipv6-policy 12
[Sysname-connlmt-ipv6-policy-12]
Related commands
connection-limit apply
761