Dot1X Critical Vlan - HP FlexNetwork MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for FlexNetwork MSR Series:
- Configuration manual (392 pages) ,
- Configuration manuals (159 pages)
Advertisement
Default
No 802.1X Auth-Fail VLAN exists.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
authfail-vlan-id: Specifies the ID of the 802.1X Auth-Fail VLAN on the port. The value range for the
VLAN ID is 1 to 4094. Make sure the VLAN has been created and is not a super VLAN. For more
information about super VLANs, see Layer 2—LAN Switching Configuration Guide.
Usage guidelines
An 802.1X Auth-Fail VLAN accommodates users who have failed 802.1X authentication for any
other reason than unreachable servers.
To delete a VLAN that has been configured as an 802.1X Auth-Fail VLAN, you must first use the
undo dot1x auth-fail vlan command.
Examples
# Configure VLAN 100 as the Auth-Fail VLAN on port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x auth-fail vlan 100
Related commands
display dot1x
dot1x critical vlan
Use dot1x critical vlan to configure an 802.1X critical VLAN on a port.
Use undo dot1x critical vlan to restore the default.
Syntax
dot1x critical vlan critical-vlan-id
undo dot1x critical vlan
Default
No 802.1X critical VLAN exists on a port.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
critical-vlan-id: Specifies the ID of the 802.1X critical VLAN on the port. The value range for the VLAN
ID is 1 to 4094. Make sure the VLAN has been created and is not a super VLAN. For more
information about super VLANs, see Layer 2—LAN Switching Configuration Guide.
165
Advertisement
