Default Command Access Levels; Default Access Levels For Tl1 Commands - Symmetricom TimeProvider 1000 User Manual

Appendix A Factory Default Values

Default Command Access Levels

Default Command Access Levels
This section describes the default access level for the TL1 commands described in
this guide. Table A-1
access level using the ED-CMD-SECU command (see the TimeProvider TL1
Reference Guide for details on this command). For a complete list of commands
and their access levels, see the TimeProvider TL1 Reference Guide.
Table A-1. Default Access Levels for TL1 Commands
Command
RTRV-USER-SECU
ENT-USR-SECU
ED-USER-SECU
ED-PID
ENT-PID
DLT-SECU
DLT-USR-SECU
RTRV-CMD-SECU
ED-CMD-SECU
CPY-MEM
RTRV-DAT
ED-DAT
RTRV-EQPT
ED-EQPT
RTRV-SYNC
ED-SYNC
RTRV-ATTR
SET-ATTR
RTRV-LOG
INIT-LOG
INIT-SYS
RTRV-SYS-MODE
SET-SYS-MODE
OPR-ACO-ALL
198 TimeProvider User's Guide
also describes whether you can edit the default command
Default Access Level
Security
Security
Security
Security
User
Security
Security
Admin
Admin
Admin
User
Admin
User
Admin
User
Admin
User
Admin
User
Admin
Admin
User
Admin
User
Editable?
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
097-58001-02 Revision C – August 2005