Table 6-8. Event Code Conditional Descriptions (Continued)
Event ID
IOCMODE
IOC mode is. <mode>
IOCSTATE
IOC state has changed, <state>
RESET
Module has been reset
CLKFSTLK
Clock entered fast-lock mode
CLKLOCK
Clock entered lock mode
SCAVAIL
SmartClock algorithm, <value>
CKTIDCHG
Input Circuit ID has changed, <cktid>
CRCENA
Input CRC has changed, <value>
FRMTYPE
Input framing type has changed, <value>
INSTATE
Input state has changed, <value>
PRIORITY
Priority has changed, <value>
RQLEVEL
Received Quality Level has changed, <old quality value>, <new quality value>
QLEVEL
User assigned Quality Level has changed, <value>
SPANTYPE
Input span type has changed, <value>
SSMBIT
E1 SSM bit has changed, <bit position>
SSMENA
Input reading of SSM has changed, <value>
THRCHG
PM threshold has changed, <PM type>, <value>
CKTIDCHG
Output Circuit ID has changed, <cktid>
FREEFLT
Free-run output fault strategy has changed, <state>
FRMTYPE
Output framing type has changed, <value>
HOLDFLT
Holdover output fault strategy has changed, <state>
OUTSTATE
Output group state has changed, < value >
OUTMODE
Output fault mode has changed, < value >
BRDGTIM
Bridging time has changed, <value>
097-58001-02 Revision C – August 2005
Chapter 6 Maintaining and Troubleshooting the TimeProvider
Event Conditional Description
IOC Clock Event Conditions
IOC Input Event Conditions
IOC Output Event Conditions
SYS Event Conditions
Troubleshooting the TimeProvider
TimeProvider User's Guide 179