Symmetricom TimeProvider 1000 User Manual page 113

Autonomous Message
A 1190 REPT EVT
HAS CHANGED,ENABLE\""
;
Use the ED-SYNC command to provision the Retiming module or port.
ED-SYNC:[<tid>]:<aid>:[<ctag>]::<keyword>=<value>;
This command has a default access level of ADMIN.
<aid> <keyword>
RTMg[-p] RTMLBO
g = A | B | C | D
p = 1 | 2
FREEFLT
HOLDFLT
Sample Command
ED-SYNC::RTMA-1:TP1000::RTMLBO=1;
Autonomous Message
A 2556 REPT EVT
CHANGED,1\""
;
097-58001-02 Revision C – August 2005
TP-SSU 03-10-24 11:11:18
"OUTA,EQPT:NA,FRMTYPE,NSA,03-10-24 11-11-18:\"RTMSTATE
<value>
0 = 0 to 133 ft
1 = 133 to 266 ft
2 = 266 to 399 ft
3 = 399 to 533 ft
4 = 533 to 650 ft
CUTTHRU
RETIME
CUTTHRU
RETIME
"TP-SSU" 05-02-10 13:35:56
"RTMA,T1:LBO,TC,05-02-10,13-35-56,,,,:\"PORT LBO HAS
Chapter 4 Provisioning the TimeProvider
Description
Sets the Line Build-out
length for the designated
module or port
No retiming is performed
when the LO enters
Free-run mode
Retiming is performed
when the LO enters
Free-run mode
No retiming is performed
when the LO enters
Holdover mode
Retiming is performed
when the LO enters
Holdover mode
TimeProvider User's Guide 113
Provisioning the Outputs
Default value
0
RETIME
RETIME