Symmetricom TimeProvider 1000 User Manual page 158

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
Table 6-5. Event Codes (Continued)
Event ID
Description
INACTTIME The communication
inactivity timeout has
been set. If no activity
within the specified
time, the session
closes
INITLOG The event log has
been initialized
IPADDR The IMC Ethernet
address has been
changed
IPGATE The IMC Ethernet
gateway address has
been changed
IPSUB The IMC Ethernet
subnet mask has
been changed
ISDIFF Indicates that the
CRC of two Istate
images stored on
separate modules are
different
ISEQ Indicates that the
CRC of two Istate
images stored on
separate modules are
equal
LOGECHO The system echoes
the login or logout
events
LOGIN A user has logged in
to the system
LOGOUT A user has logged
out of the system
PIDCHG A user's password
has changed in the
database
158 TimeProvider User's Guide
Keyword AID
TYPE
EQPT
EQPT
EQPT
EQPT
EQPT
EQPT
EQPT
EQPT
EQPT
EQPT
EQPT
Default Value/
Description of Values
Keyword
0 0 – Disable timeout
100 to 10000 seconds
n/a n/a
127.0.0.1 1.0.0.1 to 254.255.255.254
127.0.0.1 1.0.0.1 to 254.255.255.254
255.255.255.0 n/a
n/a n/a
n/a n/a
ENABLE ENABLE – The login/logout
events are echoed
DISABLE – The
login/logout events are not
echoed
n/a n/a
n/a n/a
pid User Password – up to 20
alphanumeric characters
097-58001-02 Revision C – August 2005