Symmetricom TimeProvider 1000 User Manual page 160

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
Table 6-5. Event Codes (Continued)
Event ID
Description
INPREF The specified input
has been set as the
system reference
IOCMODE The specified IOC
has become Active
IOCSTATE The specified IOC
has been inserted
into the system. The
IOC is automatically
placed In-Service
The specified IOC
has been taken out of
service. The IOC can
no longer generate
alarms, be
provisioned, or
accept queries
Communication
between the IMC and
IOC has failed
The specified IOC
has been removed
from the system
RESET The indicated IOC is
being restarted after
a user-requested
reset. All alarms are
cleared, if it was
Active, it becomes
Standby
SYSMODE The system mode of
operation has been
changed
CLKFSTLK The local oscillator in
the specified IOC is
in Fast-Lock mode
160 TimeProvider User's Guide
Keyword AID
TYPE
EQPT
EQPT
EQPT
EQPT
EQPT
IOC Clock Events
EQPT
Default Value/
Description of Values
Keyword
PRS PRS | INP1 | INP2
ACTIVE ACTIVE | STANDBY
INSRV INSRV – In service
OOSRV – Out of service
COMMFLT –
Communications fault
UNEQUIPPED
n/a n/a
SSU SSU – Sync Supply Unit
mode
SUB – Subtending mode
PRR – Primary Reference
Receiver mode
n/a n/a
097-58001-02 Revision C – August 2005