Symmetricom TimeProvider 1000 User Manual page 169

Table 6-7. Alarms (Continued)
Alarm ID
Alarm Condition
Or
Description
CONDTYPE
IOCFAIL A summary alarm for
failures of the IOC
hardware that are not
specified in other alarms.
BTBCKUP All BesTime Backup
sources, inputs are
unusable to the
BesTime engine.
CLKBRDG The local oscillator on
the specified IOC is in
Bridging Mode.
CLKHOLD The local oscillator on
the specified IOC is in
Holdover Mode.
CLKFREE The local oscillator on
the specified IOC is in
Free-run mode.
CLKWARM The local oscillator on
the specified IOC is in
Warm-up mode.
SYNTHEOR The synthesizer
generating the modules
stable output frequency
has reached the defined
End-of-Range for the
type of oscillator used
on the IOC.
IMC2COMM A communication alarm
with the IMC module
and IOC2 module.
IOC2TO A communication alarm
1COMM from IOC2 to IOC1.
IOCFAIL A summary alarm for
IOC BIST faults.
BTBCKUP All BesTime Backup
sources, inputs are
unusable to the
BesTime engine.
097-58001-02 Revision C – August 2005
Chapter 6 Maintaining and Troubleshooting the TimeProvider
Error
AID Service
Delay
TYPE Affecting
Default
EQPT SA IMMED
EQPT NSA IMMED
EQPT NSA IMMED
EQPT SA IMMED
EQPT SA IMMED
EQPT SA IMMED
EQPT SA IMMED
<aid> = IOC2
EQPT NSA IMMED
EQPT NSA IMMED
EQPT SA IMMED
EQPT NSA IMMED
Troubleshooting the TimeProvider
Alarm Default
Error
Level
Delay
Editable
SSU PRS SUB
NO MJ MJ
NO __ NA
NO – NA
NO MJ MJ
NO MJ MJ
NO MN MN
NO MJ MJ
NO MN MN
NO MN MN
NO MJ MJ
NO – NA
TimeProvider User's Guide 169
MJ
__
–
MJ
MJ
MN
MJ
MN
MJ
–