Symmetricom TimeProvider 1000 User Manual page 170

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
Table 6-7. Alarms (Continued)
Alarm ID
Alarm Condition
Or
Description
CONDTYPE
CLKBRDG The local oscillator on
the specified IOC is in
Bridging Mode.
CLKHOLD The local oscillator on
the specified IOC is in
Holdover Mode.
CLKFREE The local oscillator on
the specified IOC is in
Free-run mode.
CLKWARM The local oscillator on
the specified IOC is in
Warm-up mode.
SYNTHEOR The synthesizer
generating the modules
stable output frequency
has reached the defined
End-of-Range for the
type of oscillator used
on the IOC.
ANTCOMM Loss of communications
to antenna
GPSPOS The GPS Antenna's
position is unknown
GPSPWR TimeProvider power to
TPIU is either high or
low.
GPSSYS GPS System is
indicating an error with
BIST (at startup) TRAIM,
and/or UTC/ephemeris
data.
GPSTRK The GPS Engine is not
tracking any satellites.
170 TimeProvider User's Guide
Error
AID Service
Delay
TYPE Affecting
Default
EQPT NSA FLT
DELAY
EQPT SA IMMED
EQPT SA IMMED
EQPT SA IMMED
EQPT SA IMMED
<aid> = GPS
EQPT NSA IMMED
EQPT NSA FLT
DELAY
T1 NSA IMMED
EQPT NSA FLT
DELAY
EQPT NSA FLT
DELAY
Alarm Default
Error
Level
Delay
Editable
SSU PRS SUB
NO – NA
NO MJ MJ
NO MJ MJ
NO MN MN
NO MJ MJ
NO MN MN
YES NA NA
NO MN MN
YES MN MN
YES MN MN
097-58001-02 Revision C – August 2005
–
MJ
MJ
MN
MJ
MN
NA
MN
MN
MN