Symmetricom TimeProvider 1000 User Manual page 117

Description of Alarm
Alarm ID
Condition
BTBACK All BesTime backup
UP sources are unusable
to the BesTime engine
IOCFAIL Summary alarm of IOC
failures; for example,
calibration was unsuc-
cessful
CLKWARM Local oscillator on the
specified IOC is in
Warm-up mode
CLKFREE Local oscillator on
specified IOC is in
Free-run mode
CLKBRDG Local oscillator on
specified IOC is in
Bridging mode
CLKHOLD Local oscillator on
specified IOC is in
Holdover mode
SYNTHEOR The synthesizer has
reached the defined End
of Range for the
oscillator type in the IOC
ANTCOMM Loss of communications
to the antenna
GPSPOS Position of the antenna
is unknown
GPSPWR Power to the TPIU is too
high or too low
GPSSYS Error with startup test,
TRAIM, and/or UTC/
Ephemeris data
GPSTRK GPS engine is not
tracking satellites
INPDISQ Specified input has
been disqualified or
qualified as a possible
system reference.
097-58001-02 Revision C – August 2005
Possible Error
Alarm Delay
Levels Default
IMMED
MN | MJ | IMMED
CR
MN | MJ IMMED
MN | MJ | IMMED
CR
MN | MJ | IMMED
CR
MN | MJ | IMMED
CR
IMMED
<aid> = GPS
IMMED
IMMED
IMMED
IMMED
IMMED
MN | MJ | FLT
CR DELAY
Chapter 4 Provisioning the TimeProvider
Provisioning Alarms
Default Level
Error
Delay
SSU
Editable?
Mode
No NA
No MJ
No MN
No MJ
No MJ
No MJ
No MJ
No MN
Yes NA
No MN
Yes MN
Yes MN
Yes MN
TimeProvider User's Guide 117
SUB
Mode
NA
MJ
MN
MJ
MJ
MJ
MJ
MN
NA
MN
MN
MN
MN