Table of Contents
Advertisement
3.8 Removing the covers
For many types of setting work, you will have to remove the machine
covers first in order to access the components.
This chapter describes how to remove and then assemble the individual
covers again. The text for each type of setting work then specifies only the
cover that needs to be removed at that particular time.
3.8.1
Fig. 6: Removing and placing the arm cover (1)
(1) - Arm cover
20
WARNING
Risk of injury from sharp parts!
Punctures possible.
Switch off the machine before removing covers.
Removing and placing the arm cover
NOTICE
Property damage may occur!
Cable at the control panel may be crushed or torn off.
Do not kink, crush or tear off the cable at the control panel.
①
②
(2) - Screw
Service Instructions 195 - 00.0 - 12/2017
Working basis
Advertisement
Table of Contents
