Removing And Fitting The Arm Cover; Removing And Fitting The Head Cover - Dürkopp Adler M-TYPE H867 Service Manual

Working basis

4.4.2 Removing and fitting the arm cover

Figure 2: Removing and fitting the arm cover
2
(1) - Arm cover screws
(2) - Left adjusting wheel for the sewing foot
Removing the arm cover
1. Position the left adjusting wheel for the sewing foot stroke (2) to 2.
2. Loosen the arm cover screws (1).
3. Hold the arm cover (3) at the adjusting wheels and remove it.
Fitting the arm cover
1. Fit the arm cover (3).
2. Screw the arm cover screws (1) firmly in place.

4.4.3 Removing and fitting the head cover

Figure 3: Removing and fitting the head cover
1
(1) - Head cover screws
Removing the head cover
1. Loosen the head cover screws (1).
2. Remove the head cover (2).
Service manual H867 Version 00.0 - 08/2013
1
Important: You can only remove the arm cover when the adjusting
wheel is positioned at 2.
3
stroke
(3) - Arm cover
2
(2) - Head cover
3
2
11