Removing And Placing The Arm Cover - Dürkopp Adler 52Xi Service Instructions Manual

Working basis
Tilting the machine head
1. Tilt the machine head as far as it will go.
Erecting the machine head
1. Erect the machine head.
3.3.2
Pic. 2: Removing and placing the arm cover
(1) - Arm cover
Removing the arm cover
1. Loosen the screws (2).
2. Remove the arm cover (1).
Placing the arm cover
1. Place the arm cover (1).
2. Tighten the screws (2).
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023

Removing and placing the arm cover

①
(2) - Screws
②
13