Device Control Block (Search Dial) - Sony MVS-8000X User Manual

When the VTR/disk recorder/frame
memory operation mode is enabled
Moving the joystick sideways controls the
tape transport/disk drive/frame memory
clip operation, at a speed determined by the
operating buttons.

Device Control Block (Search Dial)

Using the device control block (search
dial), you can directly operate an XDCAM,
disk recorder, VTR, other external device,
4 DELAY button
2 Device selection buttons
a Timecode display
This shows the current time (CURRENT)
and the start and stop point timecode values
for the current reference device (START
TC, STOP TC). When you press a device
selection button, the button lights, selecting
When the resizer control mode is enabled
Move for operations in the x-, y-, and z-
axes. Hold down the button on the tip of the
joystick to switch the joystick operation to
a finer control. (fine mode)
frame memory clip, or shotbox. The device
control block (trackball) and device control
block (joystick) can be used together.
1 Timecode display
5 Editing
buttons
the assigned device as the reference device,
and displaying its setting value.
In the case of the [SBOX] buttons, the
display does not change. When the
operation applies to a VTR/disk recorder,
the displayed setting value depends on
Names and Functions of Parts of the Control Panel
7 TIMELINE button
8 STOP button
6 External device
operation buttons
9 Search dial
3 SBOX buttons
75